Linux Soft AP softap ssid 이름 변경 방법

Linux Soft AP softap ssid 이름 변경 방법

# uaputl.exe sys_config config/uaputl.conf

# uaputl.exe bss_start

실행 하면 됩니다.

망고310은

http://crztech.iptime.org:8080/Release/mango310/linux/2013_0502/

버전을 올리면,

#   File : uaputl.conf

ap_config={

   SSID="Marvell Micro AP"         # SSID of Micro AP

   BeaconPeriod=100                # Beacon period in TU

   Channel=6                       # Radio Channel     6

#   Channel=0,1                     # auto channel select (MCS mode)

#   Channel=6,2                     # primary channel 6, secondary channel above.

#   Channel=6,4                     # primary channel 6, secondary channel below

   ChanList=1,6,11                 # Scan channel list

#   AP_MAC=00:34:22:77:46:41        # MAC address of AP

   Band=0                          # 0 for 2.4GHz band

                                   # 1 for 5GHz band

   RxAntenna=0                     # 0 for Antenna A

                                   # 1 for Antenna B

   TxAntenna=0                     # 0 for Antenna A

                                   # 1 for Antenna B

   Rate=0x82,0x84,0x8b,0x96,0x0C,0x12,0x18,0x24,0x30,0x48,0x60,0x6c

                                   # Set of data rate that a station

./uaputl.exe sys_config ../etc/wfd/config/uaputl.conf

# ./uaputl.exe bss_start

실행하시면 됩니다.

ap_config={

   SSID="CRZAP"         # SSID of Micro AP

으로 변경하고

스마트폰에서 AP를 확인 할 수 있다.

oft AP 테스트 방법

#uaputl.exe bss_start

스마트폰에서 “Marvell Micro AP” 보입니다.

IP를 Static으로 설정하는 방법은 아래와 같습니다.

# ifconfig uap0 192.168.100.1 up

마트폰에서 메뉴-> advanced-> ip,gateway,netmask 를 192.168.100.xxx로 설정하고 ,

AP를 연결하면 됩니다.